Handset Settings - AT&T E5862BC User Manual

91-5730-10-00_E5862BC CIB_R1.qxd
Select Settings.
Settings
1
1 Appearance
Set screen background color.
1 Set Time
Set time.
1 Contrast
Adjust screen contrast.
Phone Setup
1
Enter base ID to register handset.
Choose Tone or Pulse dialing.
Language
1
Choose screen display language.
Reset Settings
1
Clear phonebook.
Restore factory default settings.
4/30/2003 11:53 AM
Telephone Operation

Handset settings

Note: After selecting any option below, press the
middle Navkey button to confirm your choice.
Appearance
At this menu you can choose one of four display screen
background colors.
Set time
Select this menu to set the time displayed on screen.
You must enter four digits (09:23). Using the NavKey,
press the button, then use
DOWN
to set AM or PM. After you set the handset time once,
it will thereafter be set automatically with incoming
Caller ID information if you have this service (see page 5).
You can also turn off the time display at this menu.
Contrast
At this menu you can adjust screen contrast to one of
eight levels to maximize readability in different lighting
conditions.
Phone setup
Choose this option to register a new handset or select
dialing mode. To register, you must enter the 15-digit
ID number of the base. (To find this number, go to the
base, press , scroll down to select
MENU
, then press .)
ID OK
The phone is preset at the factory to use
You should change it to
touch-tone dialing service.
Language
At this menu you can select the language used in all
menus and screen displays. Choices are English,
Español, Français.
Reset Settings
At this menu you can delete all entries from your hand-
set phonebook, or restore all factory default settings.
16
Page 16
buttons
LEFT/RIGHT
DISPLAY BASE
TONE
only if you do not have
PULSE
dialing.