4.1.1 Dimensions and Weight
Once the 3.6 kWh All In One system has been assembled, its dimension is 1000 x 680 x
267mm, and its weight is approximately 95kg. The [Figure 4-1] and [Table 4-1] show the
outer dimensions and the weight of the device after assembly, respectively.
Weight
45kg
4.1.2 Ambient Conditions and Temperatures
Identify a proper installation location to install and remove the device easily at any time.
This device must be located within reach distance.
The ambient temperature of the installation location will range from -10°C to +40°C.
4.1.3 Minimum Clearance
This device is required to maintain a minimum clearance distance for the safe installation of
the product. Refer to the [Figure 4-2] to secure enough space and keep a distance of 0.1m
from the wall, 1m in the front of the device, 1m and 0.3m on each side, and 0.3m on top.
Australia (Eng.) 05/2015. Rev1.1
[Figure 4-1: Dimension of All in One]
Battery
Inverter ( Include case)
50kg
[Table 4-1: Weight of All in One]
4. Installation
Total
95kg
15