Table of Contents
Advertisement
12. Disassembly
12. Disassembly
12.1 Disassembly
12.1.1 Removing Electric Connection
Push down the DC disconnect switch in the distribution box.
Push down the AC circuit breaker in the distribution box.
Stand by for 40 minutes to complete discharging in the system.
Remove the AC connection terminal in the main body of the 3.6 kWh All in One.
Remove the PV connection terminal in the main body of the 3.6 kWh All in One.
Remove the communication cable from the 3.6 kWh All in One.
Remove the energy meter.
12.1.2 Disassembling the Main Body of 3.6 kWh All in One
Check to make sure that the communication connection line and the external electrical
cable are removed from the battery and product
Remove the front case cover of the enclosure as described in Chapter 5.
Separate an electrical connection connector of the battery. (BATT-A: Connector on the
system side, BATT-B: Connector on the battery side).
92
CAUTION
Risk of injury due to the heavy weight of the 3.6 kWh All in One!
Make sure to have at least two persons move this system.
CAUTION
Lethal hazards may be caused by high voltages in the 3.6 kWh All in One!
CAUTION
Lethal hazards may be caused by voltage spikes if the positive and negative
terminal of the battery are shorted by conductive metals.
Stand by for 40 minutes to complete discharging in the system.
CAUTION
When transporting the All In One system with packaged type units, remove
the battery tray from the All In One system and transport them separately.
Australia (Eng.) 05/2015. Rev1.1
Advertisement
Table of Contents
