Sharp LC-52/60LE833ELC-60LE830E Service Manual page 37

Page Line
23/24 [ETC]
1 ERROR STANDBY CAUSE1
2 ERROR STANDBY CAUSE2
3 ERROR STANDBY CAUSE3
4 ERROR STANDBY CAUSE4
5 ERROR STANDBY CAUSE5
6 STANDBY CAUSE RESET
24/24 [ETC]
1 EEP SAVE
2 EEP RECOVER
3 MONITOR ERROR CAUSE RESET
4 MODEL NAME
5 PANEL SIZE
6 PANEL LIMIT
7 PANEL RANGE LIMIT
8 SHORT CHECK MODE
9 SHORT CHECK CURRENT
10 CURRENT SW
11 PRODUCT EEP ADR
12 PRODUCT EEP DATA
13 PRODUCT FACTORY
Item Description
NO RECORD
NO RECORD
NO RECORD
NO RECORD
NO RECORD
LE830E
Remarks (adjustment detail, etc.)
ERROR STANDBY CAUSE
OFF Reset stand by cause.
OFF Writing setting values to EEPROM.
OFF Reading setting values from EEPROM.
OFF Reset of monitor error cause
MODEL NAME
46 Panel size setting.
ON PANEL LIMIT
xxx PANEL RANGE LIMIT
Enter Check LED Back light
60
LOW
0x 0 Don't touch when serving (for producer of factory)
0x 0 Don't touch when serving (for producer of factory)
1 Don't touch when serving (for producer of factory)
5 – 7
LC-52/60LE830E,RU/831E,S/833E