Table of Contents
Advertisement
Device
Power
RTS
RXD
ABD
D
Device ID codes
Device Type
Relative
Maneuvering
Absolute
Absolute Screen
Device identification pointing devices
Every pointing device is to transmit its type
identification (ID) byte on request. This allows the
player to identify the device type that is connected
to it for maximum flexibility and ease of use.
Device ID sequence
• Negate RTS: Current data transmission to the
player is stopped.
• Assert RTS.
• The device sends its 1-byte device ID.
Note: It is adviseable to send a complete data packet
after the identification byte to establish the state of
the buttons.
For more information about the ProDVD 175, please contact the website:
d6--d0
ASCII
1001101
'M'
1001010
'J'
1010100
'T'
1010011
'S'
D
B
Device ID timing
• A: device power-on to ID byte timing
− Min. 100ms
− Max. 500ms.
• B: negate RTS timing:
− Min. 10ms
− Max. irrelevant.
• C: Residual data transmission time when RTS is
negated:
− Min. 0 ms.
− Max. 1 byte period (1200 baud = 8.3ms)
• D: Assert RTS to ID byte timing when device is
powered:
− Max. 10ms.
External controller protocol
The communication with an external ProDVD
controller is done with the following settings:
− 8 data bits,
− 1 stop,
− no parity bit
− speed of 9600 Baud.
www.prodvd.philips.com
ProDVD 175
ProDVD 175
D
5
Advertisement
Table of Contents
