External Fixing Of The Unit - BONAIRE Durango 4500E Owner's Manual

BONAIRE WINDOW COOLER
Installation

External Fixing of the Unit


Ensure that the location chosen to mount the cooler is strong enough to support the operating
weight of the unit. The unit's nominal operating weight is 42 kg (93 lbs).

Ensure that the window opening is large enough for the neck of the cooler (nominally 560mm
(22") high by 560mm (22") wide).

Ensure there is a minimum 100mm (4") clearance above the external cabinet for maintenance
purposes.

Position the cooler through the window (two or more people will be required for this) so that the
unit is hard up against the outside wall of the house.

Ensure that the unit is installed level in the vertical and horizontal positions as


Ensure that the unit is installed level in the vertical and horizontal positions as illustrated, prior to
fixing the cooler.
Installation
Note that if the cooler does not
fit hard up against the outside
wall (e.g. a protruding timber
or brick window sill), utilise a
spacer block (2' x 4') of wood
(not provided) which must be
attached to the wall (the unit is
then fixed to this wood).
Page | 10