Operation - Craftsman 919.672181 Owner's Manual

Know Your Pressure Washer
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with
the location of various controls and adjustments. Save this manual for future
reference.
Throttle Control
Air Filter
Multi-Reg
Wand
High
Pressure
Pump
PRESSURE WASHER
High Pressure Pump (located
inside the shroud): Increases the
pressure of the water supply.
Engine: Drives the high pressure
pump.
High Pressure Hose: Carries the
pressurized water from the pump to
the gun and spray wand.
Spray Gun: Connects with spray
wand to control water flow rate,
direction, and pressure.
Multi-Adjustable Spray Wand:
Allows the user to use high or low
pressure and adjusts from a pencil
stream (0°) to a wide angle fan spray
(40°). See How To Use Wand
instructions in this section.
A04552

OPERATION

Chemical
Hose
Spray
Gun
Choke
Control
Hand
Oil
Grip
Fill
Chemical Hose: Feeds cleaning
agents into the pump to mix with the
pressurized water. See How To Apply
Chemicals/Cleaning Solvents in
Operation section of this manual.
ENGINE
Choke Control: Opens and closes
the choke valve in carburetor.
Throttle Control Lever: Controls
engine speed.
Starter Grip: Pulling starter grip
operates recoil starter to crank
engine.
10- ENG
High
Pressure
Hose
Engine