Table of Contents
Advertisement
INSTALLATION
Follow the same process as installing a switcher:
1.
PLUG SELECT INTO SOURCE DEVICES Red LED will light to show Select is receiving power
from source.
2.
CONNECT CABLE/S FROM SWITCHER INTO SELECT/S
3.
TURN ONE SOURCE DEVICE ON Keep other source devices off at this stage.
4.
CONNECT OUTPUT Connect HDMI output from switcher to display device
5.
TURN SWITCHER ON Plug in to mains power and turn on.
6.
PRESS SELECT BUTTON Blue LED will flash quickly on dongle as the handshake occurs,
then will stay blue when that input is selected on the switcher.
7.
TURN DISPLAY DEVICE ON
TC2-SELECT_manual_en_v1.doc
4
Advertisement
Table of Contents
