Operation; Installing And Removing The Battery Pack - DeWalt DCR006 Instruction Manual

C
FIG. 2
F
G
H
DO NOT let children come into contact with the apparatus.
Supervision is required when inexperienced operators use this
apparatus.
Page dimensions: 8.5 x 5.5 inches
D
A
E
B

OPERATION

WARNING: To reduce the risk of serious personal injury, turn
apparatus off and unplug or remove the battery pack before
making any adjustments or removing/installing attachments or
accessories.
The speaker can operate off
of DC power (a battery pack)
or with an AC power adapter
plug. To power the speaker
using the AC adapter, plug the
adapter into the appropriate
outlet and connect it to the
speaker via the AC power
input (Fig. 3, H). Battery pack
will not charge when AC
adapter is plugged in.
J

Installing and Removing the Battery Pack

(Fig. 4)
NOTE: For best results, make sure your
I
battery pack is fully charged.
To install the battery pack (L) into the
battery port (I), align the battery pack
with the rails on the sides of the port and
slide the battery in until the battery pack
is firmly seated. Be sure that it does not
disengage.
To remove the battery pack from the
apparatus, press the release button and
firmly pull the battery pack out of the port.
Insert it into the charger as described in
the charger section of this manual.
9
FIG. 3
H
FIG. 4
L
I