Operation - DeWalt DCR006 Original Instructions Manual

FUEL GAUGE BATTERY PACKS (FIG. 2)
Some D WALT battery packs include a fuel gauge which consists of
E
three green LED lights that indicate the level of charge remaining in the
battery pack.
To actuate the fuel gauge, press and hold the fuel gauge button (i). A
combination of the three green LED lights will illuminate designating the
level of charge left. When the level of charge in the battery is below the
usable limit, the fuel gauge will not illuminate and the battery will need to
be recharged.
NOTE: The fuel gauge is only an indication of the charge left on the
battery pack. It does not indicate tool functionality and is subject to
variation based on product components, temperature and end-user
application.

OPERATION

Instructions for Use
WARNING: Always observe the safety instructions and
applicable regulations.
WARNING: Do not place the Bluetooth
where it may be exposed to dripping or splashing.
®
Bluetooth Speaker Functionality (fi g. 1, 3, 4)
The speaker operates off of DC power (a battery pack). Audio can be
played through the speaker via a wireless Bluetooth
compatible Bluetooth
phone using a 3.5 mm (1/8") audio cable to the audio port (f).
POWERING THE SPEAKER ON AND OFF
To turn the Bluetooth
turned on, the LED indicator (b) will indicate the speaker's status.
Upon initial use, the speaker will require pairing. To pair speaker to a
®
Bluetooth device refer to Pairing Speaker with a Bluetooth
Device.
®
device or by connecting audio device or mobile
® speaker on, press the power button (a). When
ENGLISH
® speaker in locations
®
connection to a
®
Audio
61