LG VX2000 User Manual page 58

Data Baud
This setting enables the subscriber
terminal to set the data baud.
1. Press Soft Key 1 Menu .
2. Press
3. Press
Data Baud.
4. Select an option, press Soft Key
1 Ok.
!
Data Baud set 19,200/115,200 /230,400
Data Baud needs to be set properly based
on carrier's network. Contact carrier for the
maximum available speed.
RS-232C data cable, data baud should be set to
115,200. (230,400 is not supported). When using 1X
HSPD data service by means of USB data cable, you
may get better data speed if the data baud is set to
230,400 rather than 115,200.
54
(
Menu
Features.
Data Setting and press
When using 1X HSPD data service by means of a
)
, ,