Changing Channels; Adjusting The Volume - Samsung SPP4251 Owner's Instructions Manual

Changing Channels

Using the Channel Buttons
Press the CH or CH
When you press the CH
in sequence. You will see all the channels that the PDP has memorized.
(The PDP must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.
Directly Accessing Channels
Press the number buttons to go directly to a channel. For example, to select
channel 27, press "2" then "7". The TV will change channels when you
press the second number.
When you use the number buttons, you can directly select channels that were
either erased or not memorized. To change to single-digit channels (0~9) faster,
press "0" before the single digit. (For channel "4" press "0", then "4".
Using the PRE-CH button to select the previous channel
Press the PRE-CH button. The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel. Then,
use the PRE-CH button to quickly alternate between them.

Adjusting the Volume

Using the Volume Buttons
Press the VOL + or VOL – button to increase or decrease the volume.
Using Mute
Using the MUTE Buttons
At any time, you can temporarily cut off the sound using the MUTE button.
Press the MUTE button and the sound cuts off.
1
The word "Mute" will appear in the lower-left
corner of the screen.
To turn mute off, press the MUTE button again, or
2
simply press the VOL + or VOL – button.
button to change channels.
or CH button, the PDP changes channels
Mute
33