Honda 1996 Accord Sedan Owner's Manual page 188

Lights
Replacing a High-mount Brake
Light Bulb
1. Open the trunk and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
2. Remove the burned-out bulb by
pulling it straight out of the socket.
Maintenance
3. Install the new bulb and reinstall
the socket. Make sure the new
bulb is working.
Replacing a Rear License Bulb
BULB
1. Remove the two screws and
remove the license light assembly.
2. Remove the lens from the rubber
seal and the metal cover.
3. Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.