Honda 1996 Accord Sedan Owner's Manual page 10

4. Pull up on the shoulder part of the
belt to remove any slack. Make
sure the belt goes over your
collarbone and across your chest.
The Seat Belt System and How It Works
RELEASE
BUTTON
5. If the belt crosses your neck, you
need to adjust the belt anchor
height or your seating position.
Front seats:
Adjust the belt anchor by squeez-
ing the two buttons and sliding the
anchor downward (it has four posi-
tions) .
Rear seat:
Move toward the center of the
seat until the belt fits over your
collarbone.
RELEASE
BUTTON
To unlatch the seat belt, push the
red PRESS button on the buckle.
Guide the belt across your body to
the door pillar.
After you exit the vehicle, make sure
the seat belt is out of the way and
will not get closed in the door.
Driver and Passenger Safety