Sony xbr-65x810c Help Manual page 146

Help Guide
Television
The remote control does not operate.
Press a button on the TV to determine if the problem is with the remote control or not.
Check that the orientation of each battery matches the positive (+) and negative (-) symbols in the battery
compartment.
Battery power may be low. Replace the batteries with new ones.
There may be poor contact between the battery and the remote control. Remove the batteries, then insert them again.
Point the remote control at the remote control sensor located at the front of the TV.
Keep the remote control sensor area clear from obstacles.
Fluorescent light can interfere with remote control operation; try turning off any fluorescent light.
When you unplug the TV and plug it in again, the TV may not be able to turn on for a while even if you press the
power button on the remote control or the TV because it takes time to initialize the system. Wait for about 10 to 20
seconds, then operate it again.
When your voice is not being recognized, make sure to activate the
button, or register the remote control with the
button, then select [Settings] — Remote control settings.
button on the remote control with the
button to your TV. To confirm these settings, press the HOME
C-042-100-18(1)
Copyright 2015 Sony Corporation
139