Adidas QFL259BB Instructions Manual page 10

NORMAL TIME DISPLAY
1. Press A to change mode. Mode sequence is: normal time, referee, alarm, timer, chronograph, and my log.
2. Press B for EL.
3. Press C to toggle chime on/off.
4. Press D to flash time zone 2; press and hold D to toggle normal time display/time zone 2.
5. Press E for EL; press and hold E to toggle auto EL on/off. When auto EL is on, press any key for EL.
6. Press and hold A,B,C and D to reset the watch. All data will be erased, and all settings returned to default.
NOTE: At any point in any setting mode, press B to exit setting mode.
NOTE: In any setting mode, if no pusher is operated for 30 seconds, all changes will be saved and the
setting will automatically return to normal time display.
TIME AND CALENDAR SETTING
1. In normal time display, press and hold B, hour will begin flashing.
2. Press C to increase digit; press D to decrease digit. Press and hold C or D for fast increment/decrement.
3. Press A to advance to next setting value.
4. Setting sequence is: hour, minute, second, year, month, date, 12/24-hour format, month/date
or date/month format, and vibrate/sound on/off.
NOTE: Vibrate only applies to "Referee" digital.
5. Press B to exit setting mode.
REFEREE MODE
1. Press A to change to Referee mode.
2. Press D to select desired game time.
3. Game timers are: 0-45, 0-15, 0-40, 0-35, 0-30, 0-25, 0-20, 0-10, 0-5, SET1, SET2, SET3.
4. Press E to start game time.
5. Press E again to stop game time. Total game time will continue to run at the bottom.
6. Press E again to start game time.
7. Press C to flash stoppage time.
8. Press D to stop the game time and total game time.
9. When game time and total game time are stopped, press and hold D to reset.
REFEREE TIME SETTING
1. In referee mode, press D to advance to SET1, SET2 or SET3.
2. Press and hold B to enter setting mode; hour will begin flashing.
3. Press C to increase digit; press D to decrease digit. Press and hold C or D for fast increment/decrement.
4. Press A to advance to next setting value.
5. Setting sequence is: hour, minute, second.
6. Press B to exit setting mode.
ALARM MODE
1. Press A to change to alarm mode.
2. Press C to toggle alarm on/off.
3. Press D to toggle alarm 1/alarm 2.
ALARM SETTING
1. In alarm mode, press and hold B; hour will begin flashing.
2. Press C to increase digit; press D to decrease digit. Press and hold C or D for fast increment/decrement.
3. Press A to advance to next setting value.
4. Setting sequence is: hour, minute, normal time/time zone 2.
5. Press B to exit setting mode.
NOTE: Alarm will automatically be set to "on" after pressing B to exit alarm setting mode. However,
if no pusher is operated for 30 seconds and the display auto-exits, alarm status will be "off."