Training With A Rolling Code System - Honda 1998 Accord Sedan Owner's Manual

Main Menu
Homelink Universal Transmitter
2. Press and hold the transmitter
button until the red light begins to
flash slowly (approximately 20
seconds).
3. While continuing to hold the
transmitter button, place the
remote control for the device
against the Homelink
transmitter.
4. Press and hold the button on the
remote control. Hold both buttons
until the red light begins to flash
rapidly.
5. Release both buttons. The
transmitter should now be trained
to operate the device.
Instruments and Controls
Table of Contents
Training With a Rolling Code
System
For security purposes, newer garage
door opening systems use a "rolling"
or variable code. If you know that
your garage door opener has a
rolling code, or you have been
unable to train the transmitter after
several attempts, use the following
®
procedure. You will need someone to
help you.
TRAINING BUTTON
GARAGE DOOR
OPENER MOTOR/
CONTROL UNIT
1. Find the "Training" button on your
garage door opener motor/control
unit. The location will vary,
depending on the manufacturer.
The manufacturer's
documentation may help.
2. Press the Training button on the
motor/control unit until the light
next to the button starts flashing,
then release it.