Honda 1998 Accord Sedan Owner's Manual page 213

Main Menu
Cooling System
RESERVE TANK RESERVE TANK CAP
6-cylinder models
5. When the coolant stops draining,
tighten the drain plug in the
bottom of the radiator.
6. 4-cylinder models
Put a new washer on the drain bolt,
then reinstall the drain bolt in the
engine block. Tighten it securely.
Tightening torque:
61 lbf-ft(83N.m,8.5kgf-m)
Maintenance
Table of Contents
FILLER NECK
4-cylinder models
HOLDER
6-cylinder models
Tighten the drain bolt at the rear
of the engine cylinder block
securely.
Tightening torque:
7bf.ft (10N.m,1.0kgfm)
7. Mix the recommended antifreeze
with an equal amount of purified
or distilled water in a clean
container. The cooling system
capacity is:
FILLER NECK
Fill up to here
6-cylinder models
With 5-speed manual transmission:
1.45 US gal (5.5
With automatic transmission:
1.43 US gal (5.4
6 cylinder models
1.48 US gal (5.6
8. Pour coolant into the radiator up
to the base of the filler neck.
Fill up to here
,1.21 Imp gal)
,1.19 Imp gal)
,1.23 Imp gal)