Connections - Bunker Hill Security 62284 Owner's Manual & Safety Instructions

Connections

1. Connect Cameras to Monitor:
a. Connect the cables on the Camera
to the Extension cables.
b. Connect the Extension cables
to the Connection cables.
c. Connect the Connection cables to
AV1 and AV2 sockets on Monitor.
2. Connect the Power Adapter to the DC 12V
input socket on Monitor. Plug the Power
Adapter into a 120V grounded electrical outlet.
Not included
DC Power
DC Power Out
Item 62284
To Monitor or
Recording
Device
AV-OUT
Cable
For technical questions, please call 1-888-866-5797.
CAUTION! The Monitor and Power Adapter
MUST be used indoors in a clean, dry location.
3. Connect to Monitor or Recording
Device: Use AV-OUT cable to connect
unit to another device (not included).
NOTICE: CHECK FEDERAL, STATE
AND LOCAL SURVEILLANCE LAWS
BEFORE INSTALLING VIDEO AND/OR
AUDIO SURVEILLANCE EQUIPMENT.
Connection/Extension Cables
Extension Cable
Connection Cable
Figure D
DC Power In
DC Power Out
Page 7