Table of Contents
Advertisement
Features of your vehicle
To adjust the Zone setting:
1. Determine
the
desired
Number based upon your current
location on the Zone Map.
2. Press and hold the
seconds,
the
current
Number will appear on the display.
3. Pressing and holding the
again will cause the numbers to
increment (Note: they will repeat
...13, 14, 15, 1, 2, ...). Releasing
the button when the desired Zone
Number appears on the display
will set the new Zone.
4. Within about 5 seconds the com-
pass will start displaying a com-
pass heading again.
4
38
There are some conditions that can
cause changes to the vehicle mag-
Zone
nets, such as installing a ski rack or
a CB antenna. Body repair work on
the vehicle can also cause changes
button for 6
to the vehicle's magnetic field. In
Zone
these situations, the compass will
need to be re-calibrated to quickly
button
correct these changes. To re-cali-
brate the compass:
1. Press and hold the
more than 9 seconds. When the
compass memory is cleared a "C"
will appear in the display.
2. To calibrate the compass, drive
the vehicle in 2 complete circles at
less than 5 mph (8 km/h).
Integrated HomeLink
Control System
The HomeLink
System provides a convenient way to
replace up to three hand-held radio-
frequency (RF) transmitters with a
single built-in device. This innovative
feature will learn the radio frequency
codes of most current transmitters to
operate devices such as gate opera-
tors, garage door openers, entry
door locks, security systems, even
button for
home lighting. Both standard and
rolling code-equipped transmitters
can be programmed by following the
outlined
procedures.
HomeLink
®
information can be found
at: www.homelink.com or by calling
1-800-355-3515.
®
Wireless
®
Wireless Control
Additional
Advertisement
Chapters
Table of Contents
