Changing The Display - Sony STR-DE685 Operating Instructions Manual

Selecting the component (continued)
SPEAKERS A/B
Press SPEAKERS A/B button to output the
sound from the speakers connected to the
SPEAKERS FRONT terminals.
Each time you press the button, the display
changes cyclically as follows:
SP. A t SP. B t SP. OFF
To drive
Speaker System A
(Connected to the
SPEAKERS FRONT A
terminals)
Speaker System B
(Connected to the
SPEAKERS FRONT B
terminals)
When you select "SP. OFF", no sound will be
output from your speakers and "SP. OFF"
lights up in the display.
MUTING
Press MUTING to mute the sound. The muting
function is canceled when you turn the power
on or turn the MASTER VOLUME clockwise
to turn the volume up.
PHONES
Use to connect headphones.
• When the headphones are connected, speaker
output is automatically canceled and "SP. OFF"
lights up in the display.
GB
24
Select
SP. A
SP. B

Changing the display

DISPLAY
Each time you press DISPLAY, the display
changes cyclically as follows:
Index name of the component* t Selected
component t Sound field applied to the
program source
When the tuner is selected
Index name of the preset station* or program
station name** t Frequency t Program type
indication** t Radio text** t Current
time** t Sound field applied to the band or
the preset station
* Index name appears only when you have assigned
one to the component or preset station (page 37).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
function.
** During RDS reception only. (Models of area code
CEL, CEK only. See page 35).
DIMMER
Press DIMMER repeatedly to adjust the
brightness of the display (3 steps).
However, when you press any button, the
display becomes the brightest setting
temporary.