Clarion D8ZBSUS8 Owner's Manual page 24

2. Remove the USB memory device from the
USB slot.
Do not remove the USB memory device
when the USB mode is selected, since it may
result in loss or damage to data on the USB
memory device.
Always backup and save important data on
your computer.
To stop play
1. Press the [SRC] button and switch the
function to a source other than the USB
memory.
To listen to tracks on a connected
USB memory device
1. Press the [SRC] button to switch the source.
When USB memory device is selected,
playback will begin from the location at which
playback was preViously stopped.
*
When a USB memory device is disconnected
and then reconnected, playback will begin
from the previous track of the USB memory
device.
Confirm the proper
orientation of the USB
connector before
inserting.
*
Always insert the device fully into the
connector. Incomplete connections may
cause the device not to be recognized.
*
Depending on the number of tracks recorded,
some amount of time may be required until all
tracks are read into the unit.
*
The order in which tracks are recorded may
differ depending on the USB memory device
connected (the actual playback order may not
be the same as that indicated on your
computer's display).
connecting
a
USB memory device
1. Connect the USB memory device to the USB
slot. Press the [SRC] button to switch the
source to the device.
Playback will begin from the first file
recorded on the device.
USB Operations
24
DB285USB