Clarion D8ZBSUS8 Owner's Manual page 22

Operations Common
to
Each Mode
• Setting the car speaker output for the
cellular phone
When the AUX input jack is used to connect an
AUX BLUETOOTH BB (BLT370) (sold
separately):
*
The factory default setting is "RIGHT".
*
To output the telephone calls, set the cellular
phone interrupt to "ON".
2-1. Select "TEL-SP".
3-1. Turn the [ROTARY] knob to select "RIGHT'
or "LEFT".
• RIGHT:
Telephone calls can be heard on the front
right speaker connected to this unit.
• LEFT:
Telephone calls can be heard on the front
left speaker connected to this unit.
• Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
When the AUX input jack is used to connect an
AUX BLUETOOTH BB (BLT370) (sold
separately):
*
The factory default setting is "OFF".
2-1. Select "TEL-SW".
3-1. Turn the [ROTARY] knob to select the
setting. Each time you turn the [ROTARY]
knob, the setting changes in the following
order:
"OFF"
+-+
"ON"
+-+
"MUTE"
• OFF:
This unit continues normal operation even
when the cellular phone is used.
• ON:
You can listen to your telephone calls from
the speakers connected to this unit.
*
When listening to your calls on your car
speakers, you can adjust the volume by
turning the [ROTARYl knob.
• MUTE:
The sound from this unit is muted during
telephone calls.
Note:
• If connecting
a
hands-free kit, please ensure the
setting is ON to receive the telephone audio
through the system.
22
DB2B5USB
AUX function
This system has an external input jack on the
front panel so you can listen to sounds and
music from external devices connected to this
unit.
• Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
*
The factory default setting is "MID".
1. Press and hold the [DISP] button for 1
second or longer.
2. Select "AUX SENS".
3. Turn the [ROTARY] knob to select "HIGH",
"MID" or "LOW".
Note:
• When AUX mode is selected, AUX IN sensitivity
can be set.