Changing The Batteries; Temperature Control And Adjustment - Danfoss living connect Installation And User Manual

User Guide

3. Changing the batteries

When the battery level is low, the alarm bell and battery icon will
flash simultaneously.
If the battery goes flat, the system switches automatically to frost
protection mode.
Remove the battery cover and insert two batteries. Ensure that
the batteries are correctly oriented.
Note: Rechargeable batteries must not be used - use only 1.5V AA
alkaline batteries.

4. Temperature control and adjustment

The temperature is usually controlled via
Danfoss Link™ CC, but may be changed at
any time using the thermostat's buttons.
If this is done, the thermostat sends a
message to Danfoss Link™ CC, instructing
it to synchronise the other thermostats in
the room.
The change only remains in effect until the
next programmed period.
Temperature range 4-28°C.
Danfoss Heating Solutions
18
19
20
21
Press to change
the temperature.
UK
26
25
24
23
17