Installation; Key Scale Components - Globe GSP30B Instruction Manual

Make sure the scale is placed on a stable, flat surface.
Avoid the following areas when installing the machine:
• Areas subject to high temperatures or high humidity
• Areas exposed to direct sunlight
• Areas where water or other liquids can be easily spilled on the machine
• Areas subject to excessive vibration or unstable surfaces
• Areas exposed to direct cold air
• Areas subject to low temperatures
• Areas subject to a lot of dirt
• Areas with large voltage fluctuations
Check the level indicator to make sure the scale is level. If the machine is not level, weighing may not be
accurate.
To adjust the machine to a level position, rotate the four adjustment feet until the level bubble is completely
centered in the round level indicator.
Plug the power cord into the AC power outlet on the bottom side of the scale.
Vendor Display
Keysheet
AC Power Cord
Connection
(On bottom of scale)
Page 6

Installation

Key Scale Components

Weigh Platter
Level Indicator
Label Printer
Adjustable Feet
Customer Display
AC Power Cord
On/Off
Power
Switch
Tie-downs
Operating Keysheet
Scale Set-Up Keysheet
Cash
Drawer
LAN
(Ethernet Cable required
to connect with PC)
USB