DFI NB30-EC User Manual page 77

Onboard AC97 Codec
Enabled This option is used to enable the onboard AC97
codec.
Disabled This option is used to disable the onboard AC97
codec. Disable the onboard AC97 codec when
using a 6-channel audio CNR card or an audio PCI
card.
CNR LAN Control
Enabled Select this option to use the LAN CNR board that
is installed in the CNR slot.
Disabled Select this option to disable the LAN CNR board
that is installed in the CNR slot.
Onboard LAN Control (NB30-EL and NB35-EL only)
This field is used to enable or disable the Realtek RTL8100 LAN
chip.
Onboard LAN Boot ROM (NB30-EL and NB35-EL only)
Enable this field if you wish to use the boot ROM (instead of a
disk drive) to boot-up the system and access the local area
network directly. If you wish to change the boot ROM' s settings,
type the <Shift> and <F10> keys simultaneously when prompted
during boot-up. Take note: you will be able to access the boot
ROM's program (by typing <Ctrl> + <S>) only when this field is
enabled.
Onboard Super IO Device
Move the cursor to this field and press <Enter>. The following fields
will appear.
KBC Input Clock
This is used to select the input clock of your keyboard.
Keyboard/Mouse Power On
This field allows you to use the keyboard or PS/2 mouse to
power-on the system. To use this function, make sure JP1 is set to
2-3 On - the Wake-On-Keyboard/Mouse function enabled. Refer
to "Jumper Settings for Wake-On-Keyboard/Wake-On-Mouse" in
chapter 2 for more information.
Award BIOS Setup Utility
3
77