Advertisement
2. Install and Operation
The VCI-100 is USB MIDI class compliant and provides simple plug and play with Macintosh OS X
and Windows XP. Drivers are not required.
(1)
Windows XP
1.Set the power select switch on the rear panel to AC ADAPTOR when using the exclusive AC
adaptor. Set to USB BUSS POWER if using USB connection to provide power from your computer.
NOTE: Please use the exclusive power adaptor for stable operation if the USB is connected to a
non-powered USB hub or if the computer does not have enough power capacity.
2.Connect the VCI-100 to the computer via USB.
The power LED, Jog wheel, control switch LED will light up.
A window will pop up and say a new device has been detected and drivers for Vestax PC-
CONTROLLER, USB combined device and USB audio device will be installed automatically. (The
message may not pop up if the driver is installed or if it's not the first time to be connected.)
3.The Data send LED will blink along with each movement of the VCI-100 to indicate the output of the
control signals when the drivers have been installed perfectly.
4.To check connection status in Windows XP, view [control panel] > [system] > [hardware] > [device
manager] > inside USB controller find [USB combined device] (Property: Location: Vestax PC
CONTROLLER) > inside sound, video and game controller find [USB Audio device] (Property:
Location: Vestax PC-CONTROLLER). If both are displayed and the status is "This device is installed
normally", the VCI-100 and computer is connected normally.
Advertisement
