Advertisement
REAR PANEL SECTION
(13)Touch Sensitivity level volume
The VCI-100 uses a capacitance type touch sensor, which allows the sensitivity to be controlled
with this volume for temperature, humidity and the users capacitance differences. Adjust the
sensitivity level by touching the metal part of the JOG wheel and turning the volume, until the
sensor LED lights up. The touch sensor will react without direct touch when the sensitivity is at
the maximum level.
(14)C.F. curve control volume
The cross fader curve control, an original function added to a DJ mixer by Vestax, has been
applied to the VCI-100. The curve is gentle and suitable for long mixes when it's at the minimum,
and sharp and suitable for scratching when it's at the Maximum.
(15)Power SW (Adaptor / OFF / Buss power)
Power switch of the VCI-100. Set the switch to AC ADAPTOR when using the exclusive AC
adaptor, set to USB BUSS POWER when using power provided from the computer via USB.
NOTE: Please use the exclusive power adaptor for stable operation if the USB is connected to a
non-powered USB hub or if the computer does not have enough power capacity.
Advertisement
