Related Manuals for Vestax VCI-100
Summary of Contents for Vestax VCI-100
- Page 1 English Manual tech@vestax.com...
- Page 2 CONGRATULATIONS！ Thank you for purchasing the Vestax VCI-100. Please read through the users manual thoroughly to use the VCI-100 safely and at its best performance. CONTENTS Features Safety Concerns Precautions for use 1.Minimum system requirement 2.Install and operations 3.Part names & Functions 4.Trouble shooting...
-
Page 3: Important Safeguards
IMPORTANT SAFEGUARDS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1.Read instructions-All the safety and operating 9.This product should never be placed near or instructions should be read before the over a radiator or heat register. - Page 4 The VCI-100 is a highly PROFESSIONAL product, with sensor JOG wheel and control technology from our turntables. Also featured is a variable curve generator that controls the crossfader curve from the hardware with original faders. The VCI-100 is built with high quality mechanical parts and a PCB designed for accurate and stable operations.
-
Page 5: Minimum System Requirements
Macintosh Supports Mac OS X 10.3.9 / 10.4.7. Does not support previous system versions. Multi client environments that operate the VCI-100 with more than 1 software are not supported. Hardware Windows CPU: Pentium III 500 MHz (Advanced CPU required for laptops) Memory: 256MB RAM USB 2.0 Interface... - Page 6 3.The Data send LED will blink along with each movement of the VCI-100 to indicate the output of the control signals when the drivers have been installed perfectly.
- Page 7 3.The Data send LED will blink along with each movement of the VCI-100 to indicate the output of the control signals when the drivers have been installed perfectly.
- Page 8 (Ex. The play KEY LED's off signal of TRAKTOR 3.0 is not sent to the VCI-100, which leaves the play key LED of the VCI-100 turned ON even if the deck on the screen has stopped. On the other hand, TRAKTOR 3.2 has MIDI out functions and the operations in the screen will match with the VCI-100's...
- Page 9 2 color Lighting Square Push SW: 4pcs (6)Cross Fader Vestax's original high quality cross fader. Assignable to the software's cross fader. The cross fader curve is adjustable with the curve adjust volume located on the rear panel. Useful for software's without crossfader curve functions and adjustable to suite curves from long mixes to scratching.
- Page 10 This LED lights when power is provided from the AC adaptor or USB cable. (11)DATA SEND LED This LED lights when the VCI-100 has been operated and the MIDI control signal is being sent normally to the computer. If this LED does not light-up, parts of the power source or controller may have worn out.
- Page 11 The cross fader curve control, an original function added to a DJ mixer by Vestax, has been applied to the VCI-100. The curve is gentle and suitable for long mixes when it's at the minimum, and sharp and suitable for scratching when it's at the Maximum.
-
Page 12: Troubleshooting
2. Open Control Panel >> System >> Select the hardware tab and then click on "Device manager". Click the "+" on the left of "Sound, Video, Game controller". Disconnect the VCI-100 if there is a "?" or "!" mark next to "USB audio device" and check that "USB audio device" disappears from the device manager list. - Page 13 5.MIDI MAP...
- Page 14 LED 6 LED 7 LED 8 6.Specification 1. Functions, designs and system requirements are subject to change without notice. 2. Vestax is a copyright of Vestax corporation. 3. All logos and trademarks printed in this manual resides to the owner.