Adjusting Density; Remove Background Colour - Brother DCP-T300 Advanced User's Manual

Chapter 7

Adjusting Density

You can adjust the copy density to make
copies darker or lighter.
a
Load your document.
b
(MFC models only)
Press (COPY).
c
Enter the number of copies you want.
d
Press Copy Options and a or b to
choose Density.
Press OK.
e
Press a or b to make a lighter or darker
copy.
Press OK.
f
If you do not want to change additional
settings, press Mono Start or
Colour Start.
To change the default setting, follow the
instructions below:
(MFC-T800W)
a
Press Menu, 4, 2.
b
Press a or b to make a lighter or darker
copy.
Press OK.
c
Press Stop/Exit.
(DCP-T300, DCP-T500W and DCP-T700W)
a
Press Menu.
b
Press a or b to choose 2.Copy.
Press OK.
c
Press a or b to choose 4.Density.
Press OK.
d
Press a or b to make a lighter or darker
copy.
Press OK.
e
Press Stop/Exit.
24

Remove Background Colour

7
Removes the background colour of the
document when copying. This can save ink
and help you read the document clearly.
As you select a higher setting, the white
background will become more apparent.
NOTE
This function is for use only when making
colour copies. The background colour is
automatically removed for all
monochrome copies.
a
Load your document.
b
(MFC models only)
Press
c
Enter the number of copies you want.
d
Press Copy Options and a or b to
choose Remove Bkg. Clr.
Press OK.
e
Press a or b to choose Low, Medium,
7
High or Off.
Press OK.
f
Press Colour Start.
NOTE
Fit to Page and Layout(2in1 ID)
are not available with
Remove Bkg. Clr.
7
(COPY).
7