Installing Supplied Software - Panasonic DMC-FT4 Basic Operating Instructions Manual

Installing supplied software

•
The supplied CD-ROM includes the following software.
–
PHOTOfunSTUDIO 8.1 AE (Windows XP/Vista/7)
–
LoiLoScope 30 day full trial version (Windows XP/Vista/7)
(This will only install a shortcut to the trial version download site.)
•
Before inserting the CD-ROM, close all running applications.
Check the environment of your PC.
•
Operating environment of "PHOTOfunSTUDIO 8.1 AE"
–
OS:
Windows
Windows Vista
Windows
–
CPU:
Pentium
Pentium
Pentium
–
Display:
1024k768 pixels or more (1920k1080 pixels or more recommended)
–
RAM:
512 MB or more (Windows
1 GB or more (Windows
2 GB or more (Windows
–
Free hard disk space:
450 MB or more for installing software
•
Refer to the operating instructions of "PHOTOfunSTUDIO" (PDF) for further
operating environment.
Insert the CD-ROM with the supplied software.
•
When you insert the supplied CD-ROM, the install menu will start.
Click on the [Applications] on the install menu.
Click on the [Recommended Installation].
•
Proceed with installation according to messages appearing on the screen.
Note
•
The software compatible with your PC will be installed.
•
"PHOTOfunSTUDIO" is not compatible with Mac.
24
VQT4E06 (ENG)
XP (32bit) SP3,
R
(32bit) SP2,
R
7 (32bit/64bit) and SP1
R
III 500 MHz or higher (Windows
R
III 800 MHz or higher (Windows Vista
R
III 1 GHz or higher (Windows
R
R
R
R
7)
R
XP/Windows Vista
R
7 32bit),
7 64bit)
XP),
),
R
),
R