(!I:) Other Functions; Using The Aux Source; About Aux1 And Aux2; Aux1 Source - Pioneer DEH-P4000UB Operation Manual

Section
ED (
Other Functions
Using the AUX source
Up to two auxiliary devices such as VCR or
portable devices (sold separately) can be con-
nected to this unit. When connected, auxiliary
devices are automatically read as AUX sources
and assigned to AUX1 or AUX2.
The relation-
ship between AUX1 and AUX2 sources is ex-
plained below.
About AUX1 and AUX2
There are two methods to connect auxiliary de-
vices to this unit.
AUX1 source:
When connecting auxiliary equipment using
a
stereo mini plug cable
• Insert the stereo mini plug into the
input jack on this unit.
For more details, refer to What's What on page
9.
This auxiliary device is automatically set to
AUX1.
AUX2 source:
When connecting auxiliary equipment using an
IP-BU5-RCA Interconnector (sold separately)
• Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separetely)
to connect this unit to auxiliary equipment
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner's manual.
This auxiliary device is automatically set to
AUX2.
• You can only make this type of connection if
the auxiliary device has RCA outputs.
@
En
)
Selecting AUX as the source
• Press SOURCE to select AUX as the
source.
• If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on page 27.
Setting the AUX title
The title displayed for the AUX1
or AUX2
source can be changed.
1 After you have selected AUX as the
source, use MULTI-CONTROL and select
FUNCTION to display TITLE INPUT.
2 Enter a title in the same way as the
built-in CD player.
For details concerning operation, refer to
En-
tering disc titles on page 17.0
Turning the clock display
on or off
You can turn the clock display on or off.
• Even when the sources are off, the clock
display appears on the display.
• Press CLOCK to turn the clock display
on
or off.
Each press of CLOCK turns the clock display
on or off.
• The clock display disappears temporarily
when you perform other operations, but the clock
display appears agai n after 25 seconds.
0