Rheem AP16697 Use & Care Manual page 16

Programming the Electronic Control
CONFIGURATION MENU
MODE
*Note: If screen is
dimmed press any
button and release
to brighten the
display before
performing desired
action.
CONFIGURE
16
– MODE PRESS TO
– CONFIGURE SELECT
– STATUS
– HISTORY
ENERGY
SAVER
– HIGH TEMP
PRESS TO
- DISPLAY
SELECT
– BEEP
– INSTANCE
Press and release the
MENU/SELECT button to
enable the configuration
menu.
Use UP/DOWN arrow buttons
to scroll through the available
configuration settings.
Press MENU/SELECT button
to choose the desired menu
item. See below for further
options.
The MODE menu is used to
change the water heater from
PERFORMANCE mode to
ENERGY SAVER mode.
Use DOWN arrow to change
the mode.
The CONFIGURE menu is used to
change additional settings for the
water heater performance and display
options.
Press the DOWN arrow button to
scroll through the available settings.
Press MENU/SELECT button to choose
the desired configuration option.
See following sheet for explanation for
each configuration setting.