Sony DVP-NS508P Operating Instructions Manual page 51

Cd/dvd player
Hide thumbs Also See for DVP-NS508P:
Table of Contents

Advertisement

◆ PROGRESSIVE (COMPONENT OUT
ONLY)
If your TV accepts progressive (525p/625p)
format signals, set "PROGRESSIVE
(COMPONENT OUT ONLY)" to "ON."
Note that you must connect to a progressive
format TV using the COMPONENT VIDEO
OUT jacks (page 14).
OFF
To output normal (interlace)
signals.
ON
To output progressive signals.
To output progressive signals
1
Select "PROGRESSIVE
(COMPONENT OUT ONLY)," and
press ENTER.
2
Select "ON," and press ENTER.
The display asks for confirmation.
3
Select "Start," and press ENTER.
The video switches to a progressive
signal for 5 seconds.
4
If the picture appears normal, select
"YES," and press ENTER.
If not, select "NO," and press ENTER.
To reset the setting
If the picture does not appear normal or goes
[/1
blank, press
to turn off the player, and
enter "369" using the number buttons on the
[/1
remote, then press
again.
◆ MODE (PROGRESSIVE)
In order for these images to appear natural on
your screen when output in progressive
mode, the progressive video signal needs to
be converted to match the type of DVD
software that you are watching.
This setting is effective only when you set
"PROGRESSIVE (COMPONENT OUT
ONLY)" in "SCREEN SETUP" to "ON."
AUTO
Automatically detects the
software type (film-based or
video-based) and selects the
appropriate conversion mode.
Normally, select this position.
VIDEO
Fixes the conversion mode to
the mode for video-based
software.
to turn on the player
◆ 4:3 OUTPUT
This setting is effective only when you set
"TV TYPE" in "SCREEN SETUP" to
"16:9."
Adjust this to watch 4:3 aspect ratio
progressive signals. If you can change the
aspect ratio on your progressive format
(525p/625p) compatible TV, change the
setting on your TV, not the player. This
setting is effective only when
"PROGRESSIVE (COMPONENT OUT
ONLY)" is set to "ON" in "SCREEN
SETUP."
FULL
Select this when you can
change the aspect ratio on your
TV.
NORMAL
Select this when you cannot
change the aspect ratio on your
TV. Shows a 16:9 aspect ratio
signal with black bands on left
and right sides of the image.
16:9 aspect ratio TV
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents