Sony DVP-NS508P Operating Instructions Manual page 20

6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
TV TYPE:
COLOR SYSTEM (VIDEO CD):
SCREEN SAVER:
BACKGROUND:
PROGRESSIVE
MODE
(PROGRESSIVE)
4:3 OUTPUT:
7
Press X/x to select the setting that
matches your TV type.
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 50)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 50)
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your audio
component such as an amplifier
(receiver) appears.
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
NO
9
Press X/x to select the type of jack
(if any) you are using to connect to
an audio component, then press
ENTER.
If you did not connect an audio
component, select "NO," then go to step
13.
If you connected an audio component
using just an audio cord, select "YES:
LINE OUTPUT L/R (AUDIO)," then go
to step 13.
If you connected an audio component
using either a digital optical or coaxial
cord, select "YES: DIGITAL OUTPUT."
20
4:3 LETTER BOX
4:3 PAN SCAN
:
(COMPONENT OUT ONLY)
: AUTO
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your audio component.
If your audio component has a Dolby
Digital decoder, select "DOLBY
16:9
DIGITAL." Otherwise, select "D-PCM."
16:9
OFF
FULL
11
Press ENTER.
"DTS" is selected.
12
Press X/x to select whether or
not you wish to send a DTS signal
to your audio component.
If your audio component has a DTS
decoder, select "ON." Otherwise, select
"OFF."
13
Press ENTER.
Quick Setup is finished and connections
are complete.
If your audio component has an MPEG
audio decoder, set "MPEG" to "MPEG"
(page 54).
AUDIO SETUP
AUDIO DRC:
DOWNMIX: DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS: DOLBY DIGITAL
48kHz/96kHz PCM:
AUDIO SETUP
AUDIO DRC:
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
48kHz/96kHz PCM:
STANDARD
ON
D-PCM
D-PCM
48kHz/16bit
STANDARD
ON
D-PCM
PCM
OFF
OFF
ON