Radio Function - LG XC102 Owner's Manual

Basic Playback
1. Connect the USB device to the USB connector
of your unit.
2. Press USB to select USB function.
"CHECKING" appears on display window, and
then the total number of files is displayed.
3. Press B B
/ [] (PLAY/PAUSE).
In addition, you can also play using the
NUMERIC buttons.
To Remove the USB from the unit
1. Press FUNCTION repeatedly to select other
modes.
2. Remove the USB from the unit.
Note:
Besides Basic Playback, if you want to operate
other functions, see the CD Playback section.
Moving to other cards
In case that more than two memory cards are
connected to the USB port, press D.SKIP on the
remote control to select a card you want to use.
Notes:
• Do not extract the USB device in operating.
• A back up demands to prevent a data damage.
• If you use a USB extension cable or USB hub,
the USB device might not be recognized.
• A device using NTFS file system is not
supported (Only the FAT (16/32) file system is
supported.).
• The USB function of this unit does not support
all USB devices.
• Digital camera and mobile phones are not
supported.
• This unit is not supported when the total
number of files is 1000 or more.

RADIO Function

Presetting the Radio Stations
You can preset 50 stations for FM and AM.
1. Press FUNCTION on the remote control or
TUNER on the front panel to select the frequen-
cy (AM or FM) you want.
2. Select a station you want by pressing TUN.-/+
on the remote control or TUNE.-/+ on the front
panel.
Tuning in automatically
- Press TUN.-/+ or TUNE.-/+ for more than 0.5
second. Scanning stops when the unit tunes
in a station.
Tuning in manually
- Press TUN.-/+ or TUNE.-/+ briefly and
repeatedly.
3. Press PROGRAM/MEMO on the remote con-
trol or PROG. on the front panel.
ber will flash on display window.
4. Press PRESET/FOLDER (
preset number you want.
5. Press PROGRAM/MEMO or PROG. again.
The station is stored.
6. Repeat the steps from 1 (or 2) to 5 to store
other stations.
To delete all of the memorized stations
Press and hold PROGRAM/MEMO or PROG. for
two seconds, "ERASE ALL" appears on display
window and then PROGRAM/MEMO or PROG.
again, the stations are deleted.
For your reference
If all stations have already been entered, "FULL"
message will appear for a moment and then a
preset number will flash. To change the preset
number, follow the steps 4 - 5.
To recall presets
Press and hold PRESET/FOLDER (
the desired preset number appears or press it
repeatedly.
Listening to the Radio
1. Press FUNCTION or TUNER to select the fre-
quency (AM or FM) you want.
The last received station is tuned in.
2. Press PRESET/FOLDER (
to select the preset station you want.
- Each time you press the button, the unit
tunes in one preset station at a time.
3. Adjust the volume by pressing VOLUME
( ) on the remote control [or rotating the
/
VOLUME control knob] repeatedly.
To listen to non-preset radio stations
Refer to the sections "Presetting the Radio
Stations" on the left.
To turn off the radio
Press POWER ( ) to turn the unit off or select
1 1 /] ]
another function mode (CD, USB, AUX,
PORTABLE).
For your reference
• If an FM program is noisy;
Press ST./MONO, then "STEREO" disappears
on display window. There will be no stereo
effect, but the reception will be improved. Press
ST./MONO again to restore the stereo effect.
• To improve reception;
Reposition the supplied antennas.
A preset num-
) to select the
/
) until
/
) repeatedly
/
9