Sony KP-57WV600 Instructions Manual page 49

DA4X.book Page 49 Thursday, October 10, 2002 4:35 PM
Button Description
qg CODE SET
Press to program the remote control to operate non-
Sony video equipment. For details, see "Programming
the Remote Control" on page 51.
qh POWER SAT/CABLE*:
Buttons receiver or cable box.
TV: Press to turn on and off the TV.
qj PIC MODE
Press repeatedly to cycle through the available video
picture modes:
in the Video Menu. For details, see "Selecting Video
Options" on pages 72-73.
qk 0 - 9 Press 0 - 9
ENTER 3 seconds. Press
immediately.
ql TWIN VIEW
Press to turn on and off Twin View. For details, see
pages 59-61.
w; CH +/- Press to scan through channels. To scan quickly
through channels, press and hold down either
button.
wa MEMORY STICK Press to display the Memory Stick Menu. For details,
see "Using the Memory Stick Picture Viewer" on
page 64.
ws DRC PALETTE Press repeatedly to cycle through the three Custom
DRC Palette options. Also available in the Video
Menu. For details, see "Selecting Video Options" on
pages 72-73.
wd DISPLAY Press once to display the current channel number,
current time, and channel label (if set). Press again to
turn Display off.
wf GUIDE* Press to display the program guide of your satellite
program provider.
* Requires that you first program the remote control (page 51), if not Sony brand.
Press to turn on and off the satellite
Vivid, Standard, Movie, Pro. Also available
to select a channel; the channel changes after
ENTER to change channels
CH
49