Download  Print this page

Advertisement

DA4X.book Page 90 Thursday, October 10, 2002 4:35 PM

Contacting Sony

Troubleshooting

Twin View
Problem
I cannot get Twin View to
work
There is no Twin View
window, or it is just static
Twin View cannot display
anything but TV channels
Twin View displays the same
program in both windows
90
If, after reading these operating instructions, you have additional
questions related to the use of your Sony television, please call our
Customer Information Services Center at 1-800-222-SONY (7669) (US
residents only) or (416) 499-SONY (7669) (Canadian residents only).
If you are having problems with your TV, you can reset all the TV's
settings to their original factory default settings, as follows.
Notice: The following procedure resets all custom settings, channel lists,
etc., to the factory default settings.
1
Turn on the TV.
2
Hold down the
RESET
3
Press the
button on the front panel of the TV.
POWER
4
Release the
button on the remote control.
RESET
Possible Remedies
If you are using a cable box to unscramble all channels (as shown on
page 24), you cannot use the Twin View feature. This is because the cable
box can unscramble only one channel at a time. But if you need the cable
box to unscramble only some (usually premium) channels, you can use
Twin View for unscrambled channels if you connect both a cable and cable
box, as shown on page 22.
You can use Twin View to view a signal from a different source that is
connected to the TV's A/V jacks (such as a VCR or DVD player) in the
second window by pressing the
Sources connected to the AUX, VIDEO 5, VIDEO 6, and VIDEO 7 inputs
display in the left Twin View window, but not the right.
Be sure the Twin View window is set to a video input or channel that has a
signal airing.
You might be tuned to a video input with nothing connected to it. Try
cycling through the video inputs by pressing the
If you connected equipment to the TV's AUX jack, it will display in the left
Twin View window, but not the right.
Try cycling through the video inputs by pressing the
Check that the
Video Label
page 84.)
Both Twin View windows might be set to the same channel. Try changing
channels in either window.
button on the remote control.
TV/VIDEO
button while in Twin View.
TV/VIDEO
TV/VIDEO
option is not set to Skip. (See the Setup Menu on
button.
button.

Advertisement

Table of Contents

   Related Manuals for Sony KP-57WV600

This manual is also suitable for:

Kp-65wv600Kp-57wv700Kp-65wv700

Comments to this Manuals

Symbols: 0
Latest comments: