ECS H61H2-M16 Manual page 44

Serial Port 1 Configuration
Scroll to this item and press <Enter> to view the following screen:
Main Advanced
Serial Port 1 Configuration
Serial Port
Device Settings
Change Settings
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=2F8h; IRQ=3)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Press <Esc> to return to the Super IO Configuration page.
Parallel Port Configuration
Scroll to this item and press <Enter> to view the following screen:
Main Advanced
Parallel Port Configuration
Parallel Port
Device Settings
Change Settings
Device Mode
40
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Chipset M.I.B III Boot
[Enabled]
IO=2F8h; IRQ=3;
[Auto]
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Chipset M.I.B III Boot
[Enabled]
IO=378h; IRQ=5
[Auto]
[Standard Parallel...]
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
H61H2-M16 USER MANUAL
Security Save & Exit
Enable or Disable Serial
Port1 (COM)
:Select Screen
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Security Save & Exit
Enable or Disable Parallel
Port (LPT/LPTE)
:Select Screen
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit