Super Io Configuration - ECS H61H2-M16 Manual

Super IO Configuration

Use this item to show the information of the Super IO Configuration.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Chipset
Super IO Configuration
Super IO Chip
Serial Port 0Configuration
Serial Port 1 Configutation
Parallel Port Configutation
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
Super IO Chip (IT8728)
This item shows the information of the super IO chip.
Serial Port 0 Configuration
Scroll to this item and press <Enter> to view the following screen:
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Chipset
Serial Port 0 Configuration
Serial Port
Device Settings
Change Settings
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=3F8h; IRQ=4)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Press <Esc> to return to the Super IO Configuration page.
H61H2-M16 USER MANUAL
M.I.B III Boot Security Save & Exit
IT8728
M.I.B III Boot Security
[Enabled]
IO=3F8h; IRQ=4;
[Auto]
Set Parameters of Floppy Disk
Controller (FDC)
:Select Screen
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Save & Exit
Enable or Disable Floppy Disk
Controller
:Select Screen
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
39