Epson Stylus Photo R320 Series Manual page 92

The power light is on but nothing prints
Cause
Your computer may not be
properly connected to the
printer.
The interface cable may
not be plugged in securely.
You may not be using the
correct interface cable.
Some error may have
occurred.
Your printer may have
broken.
Your application software
is not properly set up for
your printer.
Your computer system's
memory is too small to
handle the volume of data
in your document.
92
What to do
Perform the setup procedure described in
the Setup sheet.
Check both ends of the interface cable
between the printer and the computer.
If you are using the USB interface, use a
Revision 1.1 cable.
& See "Error/Warning Display" on page 79
Print the nozzle check pattern to see if the
printer is broken.
& See "Running a printer operation check"
in the online Reference Guide
If the printer does not print, it may be
broken. Contact your dealer.
Make sure that the printer is selected in your
application software.
Try reducing the image resolution of your
document in the application software, or
install more memory in your computer if
you can.