CPI JR 50 Service Manual page 45

Remove the steering top con race.
Remove the front fork.
RON FORK INSTALATION
Grease the steel balls, ball races and
cone races
Slide the steering stem through the
steering head pipe from the bottom.
Install the steering top one race.
Install the steering top thread nut and
tighten it until snug against the top cone
race.
NOTE:
` Back the top thread nut out 1/8
turn after it is tightened snug
Against the cone race.
`
Make sure that there is no
vertical movement and the stem
and rotates freely.
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn