CPI JR 50 Service Manual page 36

FRONT WHEEL REMOVAL
Raise the front wheel off the grand ground
by placing a block or safety stand.
Disconnect the speedometer cable.
Remove the axle shaft.
Remove the front wheel.
AXLE SHAFT INSPECTION
Measure the axle shaft runout.
SERVICE LIMIT : 0.2 ㎜
FRONT WHEEL RIM RUNOUT
INSPECTION
Measure the wheel rim runout.
SERVICE LIMIT :
Radial: 2.0 ㎜
Axial: 2.0 ㎜
DISK BRAKE SYSTEM
BRAKE OIL INSPECTION
Normal fluid lever is between upper and
lower.
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn