Normal Operation; Programme Selection; Olume Adjustment; Signal - LG LST-5100P Owner's Manual

Normal Operation

PREV. button
Number buttons
LIST button
PR +/– buttons
FAV. button
VOL +/– buttons
MUTE button
SIGNAL button
30

Programme Selection

You can select a programme as shown below.
Number buttons (on the remote control)
Use Number (0-9) buttons to select a programme directly.
PREV. button (on the remote control)
Press to return to the previous programme you viewed. For example, if
the DTV Receiver is tuned to programme 55 and then you change to pro-
gramme 56, pressing PREV. will return to programme 55.
FAV. button (on the remote control)
Press to scroll through your favorite programmes.
PR +/– buttons (on the remote control) or 3 / 4 (on the front panel)
Use PR +/– on the remote control or 3 / 4 on the front panel to cycle the
HDTV Receiver through the programmes in memory.
LIST buttons
Press LIST on the remote control and Programme List appears. Use 3 / 4
to select a programme that you want to tune.
Volume Adjustment
Adjusts the volume of analog audio out on HDTV Receiver. You must set
Audio Variable to On in the Audio menu to use the Volume Adjustment. See
page 21.
VOL +/– buttons (on the remote control) or 1 1 / 2 2 (on the front panel)
Use VOL +/– on the remote control or 1 1 / 2 2 on the front panel to adjust
the volume for analog audio out on the HDTV Receiver.
MUTE (on the remote control)
Press MUTE to turn off the volume for analog/digital audio out on the
HDTV Receiver.
otes
• Before setting Audio Variable to Off, make sure that you have turned down the TV's
volume to the minimum. Otherwise, sudden high volume sound may cause hearing
or speaker damage.
• The volume of digital audio out on HDTV Receiver can not be adjusted on the
HDTV Receiver.

Signal

Shows the signal strength bar for incoming signal to help you adjust the
antenna to the correct position for your location. You can view the signal
strength bar by pressing SIGNAL on the remote control.