Vcr Connections - LG LST-5100P Owner's Manual

Connections (Continued)

VCR Connections

Connect the L/R "AUDIO OUT" jacks and "VIDEO OUT" jack on the HDTV Receiver to the "A/V in" jacks on your
VCR using RCA-type cables. (If your VCR is equipped with an S-Video jack, use the "S-Video" jack.)
Caution
If the Output Selection is set to YPbPr and 576i display format is selected, the VCR will record an onscreen
display onto the tape during recording if:
the programme is changed with PR (+/–)
the sound level is adjusted with VOL (+/–)
or by pressing the (SELECT) button, etc.
ote
The caption signal is recorded when the display format settings are set to 576i. (Refer to page 16.)
14
VCR Connection Panel
VIDEO
AUDIO INPUT
INPUT
R
L L
HDTV Receiver Connection Panel