Hd Monitor Dvi-Hdtv Connections - LG LST-5100P Owner's Manual

Connections (Continued)

HD Monitor DVI-HDTV Connections

Antenna
Connect the "Antenna" to the "ANT IN" jack on the HDTV Receiver using a coaxial RF cable.
1 1
ote
There might be some areas where the signal strength could be too high. If so, you may need to connect the
antenna to an attenuator. Screw the attenuator onto the "ANT IN" jack. (Refer to page 9.)
Connect the "ANT LOOP OUT" jack on the HDTV Receiver to the "Antenna In" jack on your TV using a coaxial
2 2
RF cable.
Connect the "DVI OUT" jack on the HDTV Receiver to the "DVI IN for DTV" jack of your TV using DVI-D type
3 3
connector. (The Output Selection must be set to DVI, refer to Display Format Setup on page 16.)
Connect the L/R "AUDIO OUT" jacks on the HDTV Receiver to the L/R "AUDIO IN" jacks on your TV using
4 4
RCA-type cables.
ote
• 1080i, 720p, and 576p modes are available for DVI outputs.
• A DVI-HDTV input is one that is compliant with EIA-861 specifications. Check your TV or monitor's user manual to
find out if the TV or monitor's DVI input is compliant with these specifications.
• Some HD Monitors designed for PC applications using DVI-D may not work with this connection.
HD Ready TV Connection Panel
Antenna
ANTENNA
Wall Jack Panel
INPUT
OR
S-VIDEO
DVI-HDTV INPUT
INPUT
HDTV Receiver Connection Panel
VIDEO
AUDIO INPUT
INPUT
R
L
13