JVC KD-AR8500 Service Manual page 16

Cd/sd recever

Hide thumbs Also See for KD-AR8500:

Enlarged version

3.2.6 Removing the front unit

(See Figs10 to 12)

• Remove the mechanism control board, top cover and mecha-

nism section.

(1) From the bottom side of the mechanism section, remove

the double-stick tape fixing the flexible wire. (See Fig.10.)

(2) From the top side of the mechanism section, remove the

screw D attaching the front unit 2. (See Figs.11 and 12.)

(3) Move the front unit 2 toward the front to release the joint i.

(See Figs.11 and 12.)

(4) Release two joints j and k on the right side of the CD chas-

sis assembly. (See Fig.12.)

(5) Take out the front unit 2 in an upward direction.

(6) Remove the double-stick tape fixing the flexible wire and

remove the two screws E attaching the switch wire. (See

Fig.12.)

Reference:

You can remove the switch wire only without removing the

front unit 2.

1-16 (No.MA191)

Double-stick tape

Fig.10

Front unit 2

Fig.11

Double-stick tape

Flexible

wire

CD chassis assembly

Fig.12

Flexible wire

Switch wire

Front unit 2

Table of Contents

Kd-shx850