Table of Contents
Advertisement
LC-26GD4U
15. Remove the seven lock screws from the AV PWB, and detach the AV PWB.
16. Remove the one lock screw from EXT-SP PWB, and detach the EXT-SP PWB.
17. Remove the six lock screws from the LCD control PWB, and detach the LCD control PWB.
18. Remove the five lock screws from the power PWB, and detach the power PWB.
19. Remove the three lock screws from the inverter-GND PWB, and detach the inverter-GND PWB.
20. Remove the four lock screws from the inverter PWB, and detach the inverter PWB.
21. Remove the two lock screws from the 1-bit AMP. PWB, and detach the 1-bit AMP. PWB.
22. Remove the four lock screws form the speaker angle(right), and detach the speaker angle(right).
23. Remove the four lock screws form the speaker angle(left), and detach the speaker angle(left).
24. Remove the four lock screws form the center angle, and detach the center angle.
25. Remove the two lock screws from the RC/LED PWB, and detach the RC/LED PWB.
26. Remove the two lock screws from the LCD panel unit ass'y, and detach the LCD panel unit ass'y.
19
Inverter-GND PWB
15
16
EXT-SP PWB
AV PWB
15
LCD Control PWB
AV PWB Frame
POWER PWB
23
Speaker
Angle (R)
R/C, LED PWB
18
17
20
Inverter GND PWB
18
21
1-Bit Amp PWB
25
Center Angle
26
22
Speaker
Angle (L)
24
Advertisement
Table of Contents
