Sharp LC-20B2UA Service Manual page 11

» Precautions in handling the LCD panels
1. Work in a clean room (with humidities below 50%).
2. Be sure to wear an anti-static armband.
3. Handle the panels on an electroconductive mat.
4. Be careful not to fall, shake and shock the panels.
14.Remove the four screws and open the LCD display unit.
15.Remove the ITO earth angle fixing screw (1 pc.).
16.Detach the reflection/deflection, prism, diffusion, ITO sheets and diffusion plate.
17.Remove the lamp holder fixing screws (6 pcs.).
18.Detach the lamp set A/B.
19.Remove the reflection plate fixing screws (6 pcs.).
Diffusion plate
(PCOVU0107CEZZ)
ITO sheet
(PSHEP0289CEZZ)
Prism sheet
(PSHEP0287CEZZ)
20" LCD panel unit
r
Lamp holder
(LHLDZ2176CEZZ)
u
y
ITO earth angle
t
Diffusion sheet
(PSHEP0288CEZZ)
Reflection/deflection sheet
(PSHEP0286CEZZ)
11
Shielding plate
(CSLDM4685CE02)
Lamp set-A
i
(KLMP-0124CEZZ)
Lamp set-B
u
(KLMP-0125CEZZ)
Lamp holder
(LHLDZ2176CEZZ)
(MSPRP1220CEFW)
LC-20B2UA
LC-20B2UB
o
Reflection plate
(PMiR-0296CEZZ)