Sharp LC-42D65U Service Manual page 29

Page Line
36 1 LCD TEST PATTERN
2 TV TEST PATTERN 1
3 TV TEST PATTERN 2
37 1 KEY LOCK(1217)
2 KOUTEI AREA ALL CLEAR
3 A MODE AREA CLEAR
4 BACKUP AREA CLEAR
5 B MODE AREA CLEAR
6 EXECUTION
38 1 EEP SAVE
2 EEP RECOVER
3 STANDBY CAUSE RESET
4 SETTING FOR ADJ
*1 Details of P1.9 (NORMAL STANDBY CAUSE)
2 No operation off
3 No signal off
4 PC power management mode 1
5 PC power management mode 2
6 Off timer
8 Command from RS232C
*2 Details of P1.10 (ERROR STANDBY CAUSE)
11 Prolonged unspecified-signal input in PC mode
17 Temperature error
1A Monitor trouble detected
22 LCD controller Rom error
Item
Writing setting values to EEPROM
Reading setting values from EEPROM
Reset stand by cause
Description
in the cause of "no operation off"
in the cause of "no signal off"
in the cause of "Standby mode MODE1"
in the cause of "Standby mode MODE2"
in the cause of "SLEEP timer"
in the cause of command by RS-232C
in the cause of continuous "out of range", PC input mode
in the cause of abnormal temperature
in the cause of abnormal monitor mode
in the cause of software abnormality of LCD controller
5 – 10
LC-42D65U
Remarks (adjustment detail, etc.)